Skilled professionals you can rely on.
Sort by:
173 products
173 products
Description
The perfect companion to our Scuba Multi-Tool.
Highlights
- Remove and replace the most common scuba hoses
- 1/2”, 9/16”, 5/8” & 11/16” wrenches
- Most common hex wrenches 5/32”, 3/16” & 1/4”
- Valve handwheel driver
- All imperial sizes for US products
- Stainless steel construction with silicone over mold
- Compact size: 3.85 x 0.5 in (98 x 13 mm) thick
The perfect companion to our Scuba Multi-Tool.
Highlights
- Remove and replace the most common scuba hoses
- 1/2”, 9/16”, 5/8” & 11/16” wrenches
- Most common hex wrenches 5/32”, 3/16” & 1/4”
- Valve handwheel driver
- All imperial sizes for US products
- Stainless steel construction with silicone over mold
- Compact size: 3.85 x 0.5 in (98 x 13 mm) thick
Description
Get your buddy’s attention underwater
Highlights
- Fits 6.9 to 8.0 in (175 to 203 mm) diameter cylinders
- Install around bottom of cylinder
- Color: neon green
Get your buddy’s attention underwater
Highlights
- Fits 6.9 to 8.0 in (175 to 203 mm) diameter cylinders
- Install around bottom of cylinder
- Color: neon green
Description
Drain it quietly, drain it slowly, drain it safely
Highlights
- Attach to DIN or Yoke style valves
- Exhaust holes on opposite side of XS Scuba logo
- All brass construction
Drain it quietly, drain it slowly, drain it safely
Highlights
- Attach to DIN or Yoke style valves
- Exhaust holes on opposite side of XS Scuba logo
- All brass construction
Description
ST200 (Nitrox Sticker)
Highlights
- Durable vinyl material
- Easy to read design and layout
- Will not peel off in water with use
ST200 (Nitrox Sticker)
Highlights
- Durable vinyl material
- Easy to read design and layout
- Will not peel off in water with use
XS-Scuba
Xs-Scuba Unisex Cl01 Coil Lanyard 52 Inch W/ Plastic Clip/Split Black Ring Diving Instrument
$20.00
Unit price perXS-Scuba
Xs-Scuba Unisex Cl01 Coil Lanyard 52 Inch W/ Plastic Clip/Split Black Ring Diving Instrument
$20.00
Unit price perCoil Lanyard - 52" Plastic Clip/Split Ring
- One end has a Delrin / stainless steel wire gate snap hook. The other end has a stainless steel split ring and cord with lock
- These coils lanyards are reinforced with internal stainless       steel cable for maximum strength
- Just disengage the side release clip to extend the 10" (25.4 cm)Â coil lanyard a full 52"Â (132 cm)
- Fastens back to a secure, compact position in seconds
- Excellent for small lights and writing slates
XS-Scuba
Xs-Scuba Unisex Cl02 Coil Lanyard-52 Inch With Snp Clp/Split Black Rng Diving Instrument
$28.00
Unit price perXS-Scuba
Xs-Scuba Unisex Cl02 Coil Lanyard-52 Inch With Snp Clp/Split Black Rng Diving Instrument
$28.00
Unit price perCoil Lanyard - 52" Stainless Steel Snap Clip/Split Ring
One end has a stainless steel carabiner clip. The other end     has a stainless steel split ring and cord with lock
These coils lanyards are reinforced with internal stainless steel cable for maximum strength
Just disengage the side release clip to extend the 10" (25.4 cm)Â coil lanyard a full 52"Â (132 cm)
Fastens back to a secure, compact position in seconds
Ideal for use with gauge consoles and medium-sized lights
XS-Scuba
Xs-Scuba Unisex Cl03 Coil Lanyard-52 Inch With Clip/2 Ends Black Diving Instrument
$36.00
Unit price perXS-Scuba
Xs-Scuba Unisex Cl03 Coil Lanyard-52 Inch With Clip/2 Ends Black Diving Instrument
$36.00
Unit price perCoil Lanyard - 52" Stainless Steel Clip Both Ends
Both ends have stainless steel carabiner clips
These coils lanyards are reinforced with internal stainless steel cable for maximum strength
Just disengage the side release clip to extend the 10" (25.4 cm)Â coil lanyard a full 52"Â (132 cm)
Fastens back to a secure, compact position in seconds
Perfect for camera equipment and large lights
|
|
XS-Scuba
Xs-Scuba Unisex Diving Hl303 Highland Airspool With Black Viton O-Rings Spare Parts
$10.00
Unit price perXS-Scuba
Xs-Scuba Unisex Diving Hl303 Highland Airspool With Black Viton O-Rings Spare Parts
$10.00
Unit price perRequired swivel between HP hose and SPG
Brass construction
Highland Airspool (p/n HL303)
- Highland by XS Scuba Schrader Valve Tool:
- Fixes Leaking Low-Pressure Inflator Quick-Disconnect Hose Fittings
- Same Type Valve as Car or Bicycle Tires
- Valve Tool Easily-Removes-and-Installs Schrader Valves
- Works with Most-Manufactures Standard Low-Pressure Inflator Quick-Disconnect Hoses
- Handy Tool for Any-Divers Save-a-Dive Kit
- Steel Tool Shaft and Durable Plastic Handle
- Great Addition to Professional Scuba Repair Technicians Tool Arsenal
XS-Scuba
Xs-Scuba Unisex Hl601Bk Highland Regulator Necklace-Stndrd 7.5 Inch Dia Black Diving Instrument
$18.00
Unit price perXS-Scuba
Xs-Scuba Unisex Hl601Bk Highland Regulator Necklace-Stndrd 7.5 Inch Dia Black Diving Instrument
$18.00
Unit price perAttaches easily to any regulator second stage mouthpiece
Allows regulator to hang close under the chin
Keep your second stage where you need it
Durable, “no memory†silicone
-
Available in two sizes: 7.5†and 10†diameters
Standard 7.5" (p/n HL601BK)
XS-Scuba
Xs-Scuba Unisex Hl708 Highland Technical Spring Straps 8 Inch Black Diving Instrument
$55.00
Unit price perXS-Scuba
Xs-Scuba Unisex Hl708 Highland Technical Spring Straps 8 Inch Black Diving Instrument
$55.00
Unit price perHighland Technical Spring Straps
Spring heel fin straps are popular because they are comfortable, easy to use and practically indestructible. Highland premium spring fin straps are made from stainless steel springs and covered with nylon tube webbing to protect the spring and keep out grass and other plant matter. The thumb puller is streamlined and designed not to snag on objects like traditional finger loop designs can do. The springs have machined Delrin ends that attach to one of two types of stainless steel adapter fittings with a stainless screw and nylon lock nut. Nylon line on the inside of the spring prevents over-extension of the strap.
One kit attaches to most brands of scuba fins
High quality stainless spring & buckles will not rust
Streamlined thumb pull will not snag
Internal cave line to prevent over stretching of springs
Includes “old school†buckles for rubber fins & large post buckles for most modern fins
-
Available in three sizes
p/n HL708
Spring Length 8" / 203mm
Overall Length 10.5" / 267mm
XS-Scuba
Xs-Scuba Unisex Hl710 Highland Technical Spring Straps 10 Inch Black Diving Instrument
$55.00
Unit price perXS-Scuba
Xs-Scuba Unisex Hl710 Highland Technical Spring Straps 10 Inch Black Diving Instrument
$55.00
Unit price perHighland Technical Spring Straps
Spring heel fin straps are popular because they are comfortable, easy to use and practically indestructible. Highland premium spring fin straps are made from stainless steel springs and covered with nylon tube webbing to protect the spring and keep out grass and other plant matter. The thumb puller is streamlined and designed not to snag on objects like traditional finger loop designs can do. The springs have machined Delrin ends that attach to one of two types of stainless steel adapter fittings with a stainless screw and nylon lock nut. Nylon line on the inside of the spring prevents over-extension of the strap.
One kit attaches to most brands of scuba fins
High quality stainless spring & buckles will not rust
Streamlined thumb pull will not snag
Internal cave line to prevent over stretching of springs
Includes “old school†buckles for rubber fins & large post buckles for most modern fins
-
Available in three sizes
p/n HL710
Spring Length 10" / 254mm
Overall Length 12.5" / 318mm
XS-Scuba
Xs-Scuba Unisex Hl712 Highland Technical Spring Straps 12 Inch Black Diving Instrument
$55.00
Unit price perXS-Scuba
Xs-Scuba Unisex Hl712 Highland Technical Spring Straps 12 Inch Black Diving Instrument
$55.00
Unit price perHighland Technical Spring Straps
Spring heel fin straps are popular because they are comfortable, easy to use and practically indestructible. Highland premium spring fin straps are made from stainless steel springs and covered with nylon tube webbing to protect the spring and keep out grass and other plant matter. The thumb puller is streamlined and designed not to snag on objects like traditional finger loop designs can do. The springs have machined Delrin ends that attach to one of two types of stainless steel adapter fittings with a stainless screw and nylon lock nut. Nylon line on the inside of the spring prevents over-extension of the strap.
One kit attaches to most brands of scuba fins
High quality stainless spring & buckles will not rust
Streamlined thumb pull will not snag
Internal cave line to prevent over stretching of springs
Includes “old school†buckles for rubber fins & large post buckles for most modern fins
-
Available in three sizes
p/n HL712
Spring Length 12" / 305mm
Overall Length 14.5" / 368mm
XS-Scuba
Xs-Scuba Unisex Rattle Stick W/Attachment Clip And Magnet Cap Black Diving Instrument
$38.00
Unit price perXS-Scuba
Xs-Scuba Unisex Rattle Stick W/Attachment Clip And Magnet Cap Black Diving Instrument
$38.00
Unit price perRattle Stick With Clip
- Give it a shake to get your buddies attention
- Nice and loud underwater sound
- Built-in attachment clip
- Cap with magnet to prevent unwanted sound
- Dimensions: 5.5†x 1† (14 x 2.5 cm)
XS-Scuba
Xs-Scuba Unisex Sb725 Highland 7.25 Inch Cylinder Bands 2.5 Inch Wide Silver Diving Instrument
$167.00
Unit price perXS-Scuba
Xs-Scuba Unisex Sb725 Highland 7.25 Inch Cylinder Bands 2.5 Inch Wide Silver Diving Instrument
$167.00
Unit price perXS Scuba Dual Cylinder Bands for scuba tanks are made out of stainless steel mounting hardware.
- 2-1/2 in. wide, 100% 316 stainless steel
- 16 gauge with #4 finish
- 11 gauge backup plates
- Stainless steel mounting hardware
- 7-1/4 in. diameter cylinders
- 4-1/2 in. bolt length
Single Weight Pocket With Velcro Front
Same design as Single Weight Pocket above, except:
- Allows excess webbing from tank cam strap to attach to Velcro® loop on front of weight pocket
- Keeps cam strap webbing secure against cylinderDesigned to add up to 5 lbs. of bagged shot or hard weight
Easy addition to XS Scuba weight belt or other harness systems
Perfect for adjusting your trim
Color: black
Description
Fits Deluxe K and PRO valves
Highlights
- Protect the valve outlet
- Nylon cord lanyard included - not attached
Fits Deluxe K and PRO valves
Highlights
- Protect the valve outlet
- Nylon cord lanyard included - not attached
Description
Fits Deluxe K and PRO valves
Highlights
- Protect the valve outlet
- Nylon cord lanyard included - not attached
Fits Deluxe K and PRO valves
Highlights
- Protect the valve outlet
- Nylon cord lanyard included - not attached
Description
XS SCUBA - Handwheel Black - Easy Grip - SKU # VP12-BK
XS SCUBA - Handwheel Black - Easy Grip - SKU # VP12-BK
The Coltri DRV232 is a DIN scuba tank fill with on/off valve, handwheel bleed, thumb screw fitting, and a #4AN (JIC) male fitting for connection to a compressed gas source. Rated to 232 bar (3365 psi).
Cressi Quick Change is a changing mat, designed specifically to allow you to remove wetsuits and swimsuits. This accessory will prove incredibly useful if you engage in water sports and can be easily carried with you anywhere, thanks to its compact folding capability.
Highlights:
- Convenient changing mat designed to simplify wetsuit and swimsuit removal after water sports activities.
- Compact and easily foldable, allowing you to carry it anywhere without taking up much space.
- Generous 70 cm diameter provides ample space for gear, ensuring a comfortable changing experience.
- Soft 40x40 cm inner towel adds comfort, offering a cozy surface for your feet during changes.
- Versatile design transforms into a practical bag with handles, making it effortless to transport.
- Ideal for surfers, divers, and water enthusiasts looking for a reliable, portable changing solution.
Composition:
- Polyester
- Nylon
Color: Black/Yellow
Product Code: NE001051
Rubber weight belt with marseillaise stainless steel buckle. Because it is made from a stretch material, the belt automatically tightens up during descent, when it generally loosens due to abdominal pressure and the reduction in the thickness of the wetsuit. Consequently the belt always fits snugly against the diver in every phase of the dive.
Highlights:
- Secure grip and quick emergency release
Composition:
- Rubber
- Stainless Steel Buckle
Color: Black
Product Code: TA626000
Description
Protect your valuable second stage from bumps and scratches witha handy neoprene cover. It attaches to the LP hose and wraps around the second stage casing. Easy to slip on and off, it’s embossed with the SCUBAPRO logo and looks great while protecting your investment.
Protect your valuable second stage from bumps and scratches witha handy neoprene cover. It attaches to the LP hose and wraps around the second stage casing. Easy to slip on and off, it’s embossed with the SCUBAPRO logo and looks great while protecting your investment.
Description
Includes:
Highlights
- BPI inflator v2
- LP hose 65cm
- LP hose to BPI adaptor
- Strip
Includes:
Highlights
- BPI inflator v2
- LP hose 65cm
- LP hose to BPI adaptor
- Strip
Description
Scubapro DIN to Yoke Adapter allows you to change DIN fitted regulators to fit standard yoke type tanks. This allows DIN type regulators to be used with any tank. Adapter is made from durable corrosion resistant nickel chrome plated brass with a dual-material molded knob. Adapter is pressure rated for 230 bars (3,442 psi). Adapter weighs 13 oz. (370 g).
Highlights
- Quick Convert of DIN to Yoke Regulator
- Corrosion Resistant Nickle Chrome Plated Marine Brass
- Durable Dual-Material Molded Handwheel Knob
- Easy to Install, No Tools Required
- Pressure Rating: 230 bars (3,442 psi)
Scubapro DIN to Yoke Adapter allows you to change DIN fitted regulators to fit standard yoke type tanks. This allows DIN type regulators to be used with any tank. Adapter is made from durable corrosion resistant nickel chrome plated brass with a dual-material molded knob. Adapter is pressure rated for 230 bars (3,442 psi). Adapter weighs 13 oz. (370 g).
Highlights
- Quick Convert of DIN to Yoke Regulator
- Corrosion Resistant Nickle Chrome Plated Marine Brass
- Durable Dual-Material Molded Handwheel Knob
- Easy to Install, No Tools Required
- Pressure Rating: 230 bars (3,442 psi)
Description
The ultralight Scubapro DIN to Yoke Travel Adapter is perfect for divers. It suits those accustomed to DIN regulators. However, sometimes they need an A-clamp fitting for travel. This adapter helps them in such situations.
Highlights
- You can use your DIN first stage anywhere. This applies to any brand globally. Never miss a dive with this adapter. It mounts instantly by hand. No tools are needed for safe attachment.
- This adapter won't add weight to your gear bag. It's made from an ultra-light alloy. Therefore, it's very convenient for travel.
- Ultralight design is ideal for travel.
- Converts DIN regulators to Yoke/A-clamp fittings.
- Made from ultra-light alloy to minimise gear weight.
The ultralight Scubapro DIN to Yoke Travel Adapter is perfect for divers. It suits those accustomed to DIN regulators. However, sometimes they need an A-clamp fitting for travel. This adapter helps them in such situations.
Highlights
- You can use your DIN first stage anywhere. This applies to any brand globally. Never miss a dive with this adapter. It mounts instantly by hand. No tools are needed for safe attachment.
- This adapter won't add weight to your gear bag. It's made from an ultra-light alloy. Therefore, it's very convenient for travel.
- Ultralight design is ideal for travel.
- Converts DIN regulators to Yoke/A-clamp fittings.
- Made from ultra-light alloy to minimise gear weight.
Description
Enjoy your dive without worrying about losing your GoPro with this convenient mask mount. Specially designed for the world's most popular sports camera, it fits virtually every dual lens mask on the market, is lightweight and low profile.
Highlights
- Secure mounting so you can enjoy the dive without worrying about losing your GoPro.
- Attaches easily without having to drill or alter the mask.
- Low profile, lightweight and easy to attach and remove.
- Universal fit for most dual lens mask brands.
Enjoy your dive without worrying about losing your GoPro with this convenient mask mount. Specially designed for the world's most popular sports camera, it fits virtually every dual lens mask on the market, is lightweight and low profile.
Highlights
- Secure mounting so you can enjoy the dive without worrying about losing your GoPro.
- Attaches easily without having to drill or alter the mask.
- Low profile, lightweight and easy to attach and remove.
- Universal fit for most dual lens mask brands.
Showing 150/173
Pro Bikes
Top-grade mountain & road bikes.
Dive Gear
Trusted scuba equipment & rentals.
