Skilled professionals you can rely on.
Sort by:
18 products
18 products
The BEETLE 4×4 is specially made for SUV with off-centered spare tire on the rear hatch. This convenient and easy to install rack allows you to carry up to 2 bikes.
Highlights :
- Max Load: 15 kg
- Carries: 2 Bikes
- FRAME: The geometry of the BEETLE frame allows a quick and easy installation on most spare tyres. Solidly built of steel and high impact resistant plastic materials. No tools required, 100% assembled
- QUICK INSTALLATION. Using the hub mechanism, you can adjust, fold or unfold the rack without need for any extra tool
- BIKE FRAME SUPPORTS. The soft cradles and rubber straps allow an easy attachment of the bikes without damaging the paint. The cradles can be tightened to the rack. The cradles are made a a hard and a soft part to protect the bike frame. They are quick and easy to use. They have been 100% tested in our production line
- SAFETY. The product is supplied with an additional safety strap that allows to secure the bike
- BIKE PROTECTION. A protective pad covering an anti-sway tube will prevent the bike from moving and damaging the spare wheel, protecting the bike at the same time
- TYRE POSITION. Depending on the car model, you can find the spare tyre positioned to the right or left side. The bike support tube can be installed accordingly to fit all these cars
- SIZE. The BEETLE can be folded and will take no space in your car
Color: Black/Yellow
Product Code: BC-2525-2H
Buzz Rack Buffalo 4 Handle and Biking Rack.
Highlights:
- 4 Bikes Max weight: 60 kg
- Max bike weight: 15 kg
- 65 mm Spacce between bumper and tow ball
- Distance between bars: 31.4 cm
- XP R18-904-4 Compliant
- Not for RV and Trailers
- The patented conical tow ball clamp fits onto all 50mm diameter tow balls, even the ones which don’t meet BS standards with e.g. rough casting around the tow ball neck.
- Fitting is a matter of spinning a hand-turning wheel, a really quick, easy and ergonomically satisfactory thing to do. Turn the key in the tightening wheel and the carrier is then locked to the tow ball. Additional tensioning of a Nylock nut is sometimes required (spanner supplied), depending on the tow ball, to make sure the carrier is firm.
- Tilting is safer than with most hang-on racks, because you can take the weight of the bikes as you push down on the foot pedal, and there is double tilt stop a steel loop as well as the reinforced plastic foot pedal. When you lift the bikes back to the vertical, the foot pedal springs back to its closed position, holding the bike weight.
- The support arms are 28cm apart, centre to centre, a distance which will suit the majority of modern frames; we supply a telescopic cross bar for use with non standard frames
- Two top quality 300cm safety straps are also provided (buckles sewn not crimped). One of these should be threaded through all the bike wheels to prevent swaying and friction damage it’s up to you to provide any extra protection required and the other should be passed through all the bike frames and then looped around the carrier.
- The bike holder arms should be moved from the horizontal to the vertical for storage, or when the vehicle is parked up.
- Dimensions: 84.5 cm high from the centre of the ball and 67 cm deep from ball centre.
Composition:
- Metal
Color: Black
Product Code: BC-12575-4EH
Buzz Rack Buffalo H4 Handle and Biking Rack.
Highlights:
- 4 Bikes Max weight: 60 kg
- Bike Weight: 15 kg Max
- XP R18-904-4 Compliant
- For 3.175 cm and 5.08 cm Hitch Receivers
- Distance Between Bars: 34.2 cm
- The frame of the product is protected by a large foam. It also helps to protect the first bicycle.
- The integrated locking cable assures a secure transportation.Just take the cable out of the main frame to secure the bikes.
- The integrated locking cable assures a secure transportation.Just take the cable out of the main frame to secure the bikes.
- With the easily accessible pedal, you can safely tilt down the carrier far enough for gate access even with bikes on.The system is secured by a safety knob.
- The product is supplied with an additional safety strap and a padded foam that allow to secure the bike to the main frame without damaging it.
- The bike holder arms can be folded for storage, or when the vehicle is parked up.
- The maximum permitted load you can carry is also determined by the tow bar nose weight; you will need to check you don’t exceed this before using any tow ball mounted bike carrier.
- Not suitable for trailers, campers, or RVs. These vehicles need special racks that require much stronger specifications due the dynamics involved.
Composition:
- Metal
Color: Black/Grey
Product Code: BC-13823-4AF
BUZZ RACK’s Eco work stand is a foldable yet very stable work stand for bikes up to 25kg; it’s quick to set up and very easy to use. It’s ideal for repair jobs and when cleaning your bike.
Highlights :
- Foldable for easy storage and transportation
- At the heart of the work stand are its unique seat post holders
- These link to the seat frame to prevent the bike from pivoting on the stand
- It’s designed for outside use – the metalwork is corrosion protected and powder coated
- It’s only for bikes with standard round seat posts
- BUZZ RACK specify that it’s not suitable for bikes with carbon seat posts, but see below for Ben Moore’s comments – he’s been using Eco work stands at events for many years
- Maximum bike weight 25kg
- Dimensions when folded: 82 x 31.8 x 39cm
Color: Black
Product Code: AA-16702
Buzz Rack Moose 4 Handle and Biking Rack.
Highlights:
- 4 Bikes Max weight: 60 kg
- Max bike weight: 15 kg
- 65 mm Space between bumper and tow ball
- Distance between bars: 31.4 cm
- XP R18-904-4 Compliant
- Not for RV and Trailers
- The patented conical tow ball clamp fits onto all 50mm diameter tow balls, even the ones which don’t meet BS standards with e.g. rough casting around the tow ball neck.
- Fitting is a matter of spinning a hand-turning wheel, a really quick, easy and ergonomically satisfactory thing to do. Turn the key in the tightening wheel and the carrier is then locked to the tow ball. Additional tensioning of a Nylock nut is sometimes required (spanner supplied), depending on the tow ball, to make sure the carrier is firm.
- Tilting is a safe single-handed operation, even with the bikes fitted. The Moose 4 tilts to allow access to the boot on most cars. If you have a van or an MPV with a vertical tailgate, and you want to be able to access the boot with the bikes loaded, we recommend the Atera STRADA DL3.
- The support arms are 28cm apart, centre to centre, a distance which will suit the majority of modern frames; we supply a telescopic cross bar for use with non standard frames
- Two top quality 200cm safety straps are also provided (buckles sewn not crimped). One of these should be threaded through all the bike wheels to prevent swaying and friction damage – it’s up to you to provide any extra protection required and the other should be passed through all the bike frames and then looped around the carrier.
- The bike holder arms should be moved from the horizontal to the vertical for storage, or when the vehicle is parked up.
- Dimensions: 84.5cm high from the centre of the ball and 52cm deep from ball centre.
Composition:
- Metal
Color: Black
Product Code: BC-12574-4EHF
The BuzzRack Mozzquito is a robust rack that will carry up to three bikes and fits many cars. It has a simple and intuitive design and attaches to the tailgate using six straps with rubber coated hooks. Foam pads on the rack protect your bumper / tailgate.
Highlights :
- Max Load: 45 kg
- Carries: 3 Bikes
- Bike Weight: 15 kg max
- Your bikes are held securely in place in separate cradles
- The arms are positioned 31.8cm apart (measured from the outer edges)
- The rack is adjusted with an easy-to-use dial with settings for your car
- Supplied fully assembled – ready to mount to your car
- Folds for easy storage – compact enough to fit in the boot
- Dimensions (folded): 71 x 47 x 15cm
- The narrow arm design means most bike frames will fit securely onto this rack. This carrier has a distance of 38.1cm between the bike support arms. An ‘frame adapter’ will be required for some ladies and full-suspension bikes (listed below)
Color: Black/Yellow
Product Code: BC-17512-3H
Premium solution to carry 2 bikes on a spare tire. The platform design enhances the stability and minimizes the possible contacts between the 2 bikes. Easy mounting and fits most spare tire sizes.
Highlights :
- Max Load: 30 kg
- Bike Weight: 15 kg
- Best For: Hatchback
- Carries: 2 Bikes
- FRAME: The geometry of the PILOT 4×4 frame allows a quick and easy installation on most cars equipped with spare tires.Solidly built of steel and high impact resistant plastic materials.The geometry keeps the bikes away from the car.
- EASY AND SECURE INSTALLATION: Multiple stud pattern and optional adapters included to fit most spare tire sizes.
- LOCKING CLAMPS: The clamps are big enough to fit most bike frames.Made of reinforced Nylon, the clamps are highly resistant.An integrated pad prevents scratching the bike paint and allow most brakes cables to go through.Each clamp is equipped with a locking knob.
- WHEEL SUPPORTS: The wheel holders will accommodate all wheelbases, even very small children’s bikes.The straps allow a secure attachment of the wheels and the pads protect the rims.The straps are long enough to hold the biggest rims.
- STABILITY: Enhanced stability with rubber stabilizers.
- SIZE: If you don’t carry any bike, you can always fold the platform which might be convenient for parking.
Color: Black/Yellow
Product Code: BC-14532-2STC
Economical option for a repair stand, this product is simple and easy to use and has a great stability. A wall mounted bike work stand that is simple and easy to use and has a great stability.
Highlights :
- Capacity: 25 kg
- Hold the bike securely using the seat post, with an S-shaped head and triangle post
- NOT suitable for bikes with carbon seat posts
- Extends 33cm from the wall
- Folds flat when not in use
- Max load: 25kg
Color: Black
Product Code: AA-16703
The top tube support cradle was redesigned in 2014. Purchasing a newer Bones 3-bike arm will not impact safety or security of bike transport when used with older Bones racks.Bones 3-bike replacement arms are for 3-bike car racks only and are not recommended with 2-bike models.
Highlights :
- Compatible only with Bones 3, Axis Steel 3 and Bones Hitch 3.
- Includes all straps and tightening thumb screw.
- Driver-Side and Passenger-Side sold separately
- Left-Arm
Color : Black
Product Code :Â 21503
The top tube support cradle was redesigned in 2014. Purchasing a newer Bones 3-bike arm will not impact safety or security of bike transport when used with older Bones racks.Bones 3-bike replacement arms are for 3-bike car racks only and are not recommended with 2-bike models.
Highlights :
- Compatible only with Bones 3, Axis Steel 3 and Bones Hitch 3.
- Includes all straps and tightening thumb screw.
- Driver-Side and Passenger-Side sold separately
- Right-Arm
Color : Black
Product Code :Â 21506
The Saris Bones 3-Bike Rack combines stylish Italian design with durable, recyclable materials to provide secure, rust-free bike transport.
Highlights:
- Protection pads: Articulated rubber feet and vinyl-coated hooks to guard both bike frames and vehicle surfaces
- Straps: Spring-buckle nylon retention straps with vinyl-coated steel hooks (6 total), plus ratcheting anti-sway straps
Composition:
- Nylon
- Molded Plastic
Color: Black
Product Code : 801
Kids' bikes. Step-thru frames. Tri-bikes. Small recumbents. The list goes on. Basically, if you've got it, chances are the Freedom can move it. The ratcheting straps keep your bike in place, while our Cuscino hold downs are gentle enough for a carbon frame. Say goodbye to worry and hello to peace of mind.
- Carries 2 bikes, up to 60 lbs/bike.
- This rack fits a wheelbase up to 48" right out of the box.Â
- Standard scoop max tire width: 2.25"
- Protective rubber holders adjust to fit any frame.
- Easy-to-adjust ratcheting straps keep bikes secure.
- Universal hitch fits 1 ¼" and 2" hitches.
- Fits all styles of bike.
- Color: Black
- Product Code:Â 4412B
Â
The Saris Guardian 1053S trunk rack is a rugged and user-friendly solution for transporting two bikes. Its sturdy steel build, protective features, and easy setup make it a practical choice for everyday use.
Highlights:
- Carries 3 bikes, up to 16 Kg each.
- Completely assembled and ready to go, right out of the box.
- Bike hold downs with ratcheting straps ensure safe and secure bike transit.
- American-made steel construction that’s built to last.
- Trunk bike rack.
- No assembly needed.
- Bike hold downs with ratcheting straps separate and firmly hold up to 3 bikes.
- Bike rack straps with spring-loaded buckles ensure secure rack-to-vehicle fit.
- Rack arms adjust to fit most sedans, hatchbacks and vans – consult Saris Fit Guide for approved fits.
- American-made steel frame construction.
- Folds for compact, convenient storage.
- Coated hooks protect vehicle's finish.
- Heavy-duty foam pads protect vehicle's finish.
Composition:
- Steel
- Reinforced Nylon
Color: Black
Product Code : 1054S
For those vehicles that require a more custom fit, the Hatch Huggers replace the regular Bones, Bones EX, and Guardian rack straps. Please use the Fit Guide to determine if you need the Hatch Huggers for your vehicle.
Highlights:
- Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges.
- Hatch Huggers replace regular hook straps on your Saris trunk rack.
- Quick and easy to install and attach to your Saris Trunk Rack.
- Includes a pair of straps and two bumpers for Saris trunk-mount bike racks.
Composition:
- Two Rubber
- Reinforced Nylon
Color: Black
Product Code : 3035
The first and only 1-bike car rack with zero mechanical frame adjustments. Just place it, tighten the straps, secure your bike and go.
Highlights:
- Low cost, easy installation, convenient size.
- Built with 100% recyclable, non-rusting materials.
- Carries 1 bike up to 16 kg
- Ratcheting straps and anti-sway secure bike to rack.
Composition:
- 100% recyclable plastic frame
- Rust-free, injection-molded plastic
Color: Black
Product Code: Saris102
