Skilled professionals you can rely on.
Sort by:
21 products
21 products
This Thermoplastic hose with #4 JIC end connections is used as the fill whip hose on most Nuvair fill panels. Length: 4 ft (1.2m). Rating: 6090 psi (420 bar). Can be used as a replacement hose for Coltri 13-04-0220. Described by Coltri as "REFILL HOSE 1200 MM [FRUSTA DI RICARICA DA 1200MM]". Equipped with a safety tether, designed to prevent injuries and equipment damage caused by hose failure or accidental disconnection.
Composition:
Scubapro Superflow Hoses are made from high quality materials so they last longer and are designed to lalow the maximum flow and therefore best breathing performance for Scubapro Regulators.
Highlights:
- High-Quality Construction: Built with durable materials to provide long-lasting performance even in demanding underwater conditions.
- Ideal Length: The 64 cm (25.2 in) length offers the perfect balance of flexibility and comfort for easy hose management.
- Compatible Design: Specifically designed for use with Scubapro AIR2 and BPI systems, ensuring optimal function and reliability.
- Low-Pressure Performance: Delivers consistent air flow, enhancing your dive experience with smooth, uninterrupted air delivery.
Composition:
- Rubber
Color: Black
Product Code: 01.310.026
Description
Product description:
Highlights
- 3/8? male thread will fit most regulator 1st stages today and the female end is the universal 9/16” that fit all second stages without a swivel or special connection. The female end is fitted with a high torque nut that requires a to tighten properly.
- Low-pressure hose remains flexible at any water temperature.
- The inner bore is completely smooth and matches the internal bore of the regulator first stage for an unobstructed air flow. It has the same standard outer diameter and uses thin neoprene and reinforced-fiber hose wall reinforcement, with an enlarged inner bore, for optimal regulator flow performance.
- It enhances safety and outperforms all existing intermediate pressure hoses.
Product description:
Highlights
- 3/8? male thread will fit most regulator 1st stages today and the female end is the universal 9/16” that fit all second stages without a swivel or special connection. The female end is fitted with a high torque nut that requires a to tighten properly.
- Low-pressure hose remains flexible at any water temperature.
- The inner bore is completely smooth and matches the internal bore of the regulator first stage for an unobstructed air flow. It has the same standard outer diameter and uses thin neoprene and reinforced-fiber hose wall reinforcement, with an enlarged inner bore, for optimal regulator flow performance.
- It enhances safety and outperforms all existing intermediate pressure hoses.
Description
The Scubapro BCD Inflator Hose QD Coupling. This BCD inflator QD coupling fits all Scubapro BPI BCD inflators and attaches directly to a Scubapro Superflow hose, or any standard LP hose with regulator threaded fitting.
The Scubapro BCD Inflator Hose QD Coupling. This BCD inflator QD coupling fits all Scubapro BPI BCD inflators and attaches directly to a Scubapro Superflow hose, or any standard LP hose with regulator threaded fitting.
Description
Adapter provides a quick-disconnect between the AIR2 and your BCD.
Adapter provides a quick-disconnect between the AIR2 and your BCD.
Scubapro Superflow LP (Low Pressure) Hoses are made from high quality materials so they last longer and are designed to lalow the maximum flow and therefore best breathing performance for Scubapro Regulators.
Highlights:
- The hoses are the standard Scubapro lengths, 3/8ths male end for your First Stage with a standard regulator swivel fitting on the other end, ready to easily fit to any Scubapro Regulator.
- The Scubapro superflow hoses allow for a Scubapro Quick Disconnect (QD) fitting to be added to any length hose to allow connection to the Scubapro BPI Inflator and Scubapro Drysuits.
- The fititng is suitable for most seatec fittings but if in doubt check with one of our technicians before ordering.
Composition:
- Rubber
Color: Black
Product Code: 01.309.080
Replacement Scubapro Black Vinyl Food Grade Mouthpiece
Highlights:
- This mouthpiece is recommended for SCUBAPRO second stage models R295, R395, R095, S360, S555, S560, S600
- Does not come in clam shell packaging sold in bulk, Scubapro Black Vinyl Food Grade Mouthpiece
- Food Grade Vinyl Black Standard Sized mouthpiece
- Will fit most regulators as well as most snorkels
Composition:
- Vinyl
Color: Black
Product Code: 01.040.131
Scubapro Over Pressupre Valve Assembly (BCD Dump Valve).
Highlights:
- Prevents overinflation by automatically venting excess air to enhance diver safety.
Composition:
- Durable plastic housing, stainless steel spring, and rubber/elastomer diaphragm.
Color: Black
Product Code: 21.200.003
This mouthpiece is a great addition to any second stage. It offers ample airflow, and the well-sized bite tabs allow you to hold the regulator securely with minimal effort and no jaw fatigue.
Description
Flexible, long lasting holding band for back-up second stage to ensure a secure and quick recovery. Fits under the clip of the mouthpiece.
Flexible, long lasting holding band for back-up second stage to ensure a secure and quick recovery. Fits under the clip of the mouthpiece.
Description
Installs between low pressure regulator hose and second stage
Highlights
- Increase comfort and reduce jaw fatigue
- Used to improve regulator hose routing
- Often used to set up underarm routing of primary regulator hose
- Chromed brass construction with Viton O-rings
- Low pressure use only – below 200 psi
Installs between low pressure regulator hose and second stage
Highlights
- Increase comfort and reduce jaw fatigue
- Used to improve regulator hose routing
- Often used to set up underarm routing of primary regulator hose
- Chromed brass construction with Viton O-rings
- Low pressure use only – below 200 psi
Description
Installs between low pressure regulator hose and second stage
Highlights
- Increase comfort and reduce jaw fatigue
- Used to improve regulator hose routing
- Often used to set up underarm routing of primary regulator hose
- Chromed brass construction with Viton O-rings
- Low pressure use only – below 200 psi
Installs between low pressure regulator hose and second stage
Highlights
- Increase comfort and reduce jaw fatigue
- Used to improve regulator hose routing
- Often used to set up underarm routing of primary regulator hose
- Chromed brass construction with Viton O-rings
- Low pressure use only – below 200 psi
Description
Not all rubber hoses are created equally. Go with the quality difference and choose XS Scuba rubber hoses. Our hoses are designated with our logo on the fitting and a date code so you will know the history of the hose.
Not all rubber hoses are created equally. Go with the quality difference and choose XS Scuba rubber hoses. Our hoses are designated with our logo on the fitting and a date code so you will know the history of the hose.
Description
HL501 (Kit/Imperial)
Highlights
- Available as gauge only, or in kit form
- The gauge will thread directly into a regulator’s first stage HP port
- With a complete kit, it will thread onto the end of a HP hose
- Kit includes gauge with rubber boot, in-line adapter and airspool
- Gauge and airspool include Viton O-rings
- Glow in the dark gauge faces
- Attractive clamshell packaging (kit only)
- Both the kit and the gauge only are available in either imperial or metric units
- Imperial: 0 to 5000 psi
- Metric: 0 to 350 bar
HL501 (Kit/Imperial)
Highlights
- Available as gauge only, or in kit form
- The gauge will thread directly into a regulator’s first stage HP port
- With a complete kit, it will thread onto the end of a HP hose
- Kit includes gauge with rubber boot, in-line adapter and airspool
- Gauge and airspool include Viton O-rings
- Glow in the dark gauge faces
- Attractive clamshell packaging (kit only)
- Both the kit and the gauge only are available in either imperial or metric units
- Imperial: 0 to 5000 psi
- Metric: 0 to 350 bar
XS-Scuba
Xs-Scuba Unisex Hl601Bk Highland Regulator Necklace-Stndrd 7.5 Inch Dia Black Diving Instrument
$18.00
Unit price perXS-Scuba
Xs-Scuba Unisex Hl601Bk Highland Regulator Necklace-Stndrd 7.5 Inch Dia Black Diving Instrument
$18.00
Unit price perAttaches easily to any regulator second stage mouthpiece
Allows regulator to hang close under the chin
Keep your second stage where you need it
Durable, “no memory†silicone
-
Available in two sizes: 7.5†and 10†diameters
Standard 7.5" (p/n HL601BK)
Description
Protect your valuable second stage from bumps and scratches witha handy neoprene cover. It attaches to the LP hose and wraps around the second stage casing. Easy to slip on and off, it’s embossed with the SCUBAPRO logo and looks great while protecting your investment.
Protect your valuable second stage from bumps and scratches witha handy neoprene cover. It attaches to the LP hose and wraps around the second stage casing. Easy to slip on and off, it’s embossed with the SCUBAPRO logo and looks great while protecting your investment.
Description
The ultralight Scubapro DIN to Yoke Travel Adapter is perfect for divers. It suits those accustomed to DIN regulators. However, sometimes they need an A-clamp fitting for travel. This adapter helps them in such situations.
Highlights
- You can use your DIN first stage anywhere. This applies to any brand globally. Never miss a dive with this adapter. It mounts instantly by hand. No tools are needed for safe attachment.
- This adapter won't add weight to your gear bag. It's made from an ultra-light alloy. Therefore, it's very convenient for travel.
- Ultralight design is ideal for travel.
- Converts DIN regulators to Yoke/A-clamp fittings.
- Made from ultra-light alloy to minimise gear weight.
The ultralight Scubapro DIN to Yoke Travel Adapter is perfect for divers. It suits those accustomed to DIN regulators. However, sometimes they need an A-clamp fitting for travel. This adapter helps them in such situations.
Highlights
- You can use your DIN first stage anywhere. This applies to any brand globally. Never miss a dive with this adapter. It mounts instantly by hand. No tools are needed for safe attachment.
- This adapter won't add weight to your gear bag. It's made from an ultra-light alloy. Therefore, it's very convenient for travel.
- Ultralight design is ideal for travel.
- Converts DIN regulators to Yoke/A-clamp fittings.
- Made from ultra-light alloy to minimise gear weight.
Pro Bikes
Top-grade mountain & road bikes.
Dive Gear
Trusted scuba equipment & rentals.
