All Accessories

Highlight :

• Large, smooth, anti-tangle trigger.
•  Finger support.
• One size does not fit all
• Scuba Gear
• Bolt Snap
• Surface Makers

Composition :

• AISI 316 stainless steel.

Color : Silver

Product Code : AC-016 

Highlight :

• Solid design, perfect for many applications.

Composition :

• stainless steel

Color : Silver

Product Code : AC-012-0

Highlight :

• large and smooth anti-tangle trigger
• off-center swivel for more space
• finger support
• evenly round hook for easy clipping
• lightweight yet strong construction
• Suitable for stage cylinders and / or sidemount

Composition :

• made of AISI 316 stainless steel

Color : Silver

Product Code : AC-013

The xDeep Ha-022-2 Standard (Non-Expandable) Cargo Pouch is a streamlined utility pocket designed primarily for sidemount divers who need to store essential accessories without adding bulk to their profile.

Highlights:

• Dimensions: 250 mm x 170 mm x 15 mm
• Compact Storage: Specifically designed to be a "minimalist" option compared to the larger TEC (expandable) version.
• Two Compartments: Features a large main section for bulkier items and a smaller front compartment with a transparent window, allowing you or your buddy to see if a backup light has accidentally turned on.

Composition:

• 100% Nylon
• Hardware: 316 stainless steel double-ender and internal D-rings.

Color: Black

Product Code: HA-022-2

The Back D-rings for the Stealth 2.0 are the square D-rings that extend off the waist band, which are used for the lower tank conection point (unless using a butt plate). Additional Back D-rings can be useful for additional stage tanks or accessories, on the Stealth or any other technical diving harness.

Highlights:

• The Back D-Rings have four slots for threading onto 50mm / 2in webbing. A central hole can be used for a dome nut with a square shaft key (similar to the crotch strap connection on the Stealth Tec / Rec wing).

Composition:

• Heavy-duty 316 stainless steel.

Color: Black

Product Code: HA-052-0

The xDeep Ha-053-0 Stealth 2.0 Rubber Slidable D-Ring Kit is an essential upgrade for sidemount divers, designed to allow on-the-fly adjustments of cylinder positioning to maintain perfect trim.This kit provides a simple yet effective solution for managing the changing buoyancy of sidemount cylinders (such as aluminum 80s) during a dive. By sliding the rubber D-ring up or down the waist strap, a diver can reposition the tank’s clip-off point to keep cylinders horizontal and streamlined.

Highlights:

• Its a simple yet durable part that will let sidemount diver keep the cylinders in perfect position throughout entire dive ensuring most streamline and comfort trim profile.

Composition:

• Durable Composite Rubber
• 2 inch wide Nylon Harness Webbing

Color: Silver

Product Code: Ha-053-0

The xDeep Ha-011-0 Tri Glider Regular is a high-quality weight retainer and strap adjustment accessory designed for standard diving harnesses.

Highlights:

• Safety: Prevents weights from shifting on the waist belt, ensuring a stable center of gravity during critical dive phases such as ascents or decompression.
• Low Profile: Designed to sit flush against the webbing to minimize snagging points, which is crucial for cave or wreck diving.
• Installation: Can be used on both shoulder straps and waist belts for optimal weight distribution.

Composition:

• Corrosion-reesistant 316 stainless steel

Color: Grey

Product Code: HA-011-0

The xDeep Ha-012-0 Tri Glider Serrated is a high-grip webbing retainer designed for technical and recreational diving harnesses. Unlike standard smooth tri-gliders, the serrated version features teeth that bite into the webbing to provide an exceptionally strong, non-slip hold.

Highlights:

• Safety: It is primarily used to secure lead weight blocks on a harness waist belt, ensuring a balanced and stable center of gravity throughout the dive.
• Low Profile: Its streamlined, flat design minimizes drag and reduces the risk of snagging in overhead environments like caves or wrecks.
• Versatility: While optimized for xDeep systems (like the NX Series or Stealth 2.0), it is a universal component compatible with any standard 2-inch diving webbing.

Composition:

• Corrosion-reesistant 316 stainless steel

Color: Grey

Product Code: HA-012-0

XDEEP trim pockets can be mounted both to the shoulder straps and to the waist strap. Trimming in sidemount never was so easy. 

Highlights:

•  The XDEEP trim pockets can be used with any sidemount or harness made of 50 mm (2 inch) webbing

Composition:

• Polymer

Color: Black

Product Code: HA-016-0

The XDEEP camband plastic buckle is ideal for travelling divers as it is lightweight and provides a secure cylinder attachment. Cambands with plastic buckles provide excellent camming power with a very low weight but do not have the longevity of cam-bands with a metal buckles. The XDEEP Camband is made using 50mm for a good grip of the cylinder while a rubber pad adds further grip to ensure your cylinder doesn’t move an inch.

XDEEP Composite camband features:

• Plastic buckle
• 50mm webbing
• Rubber grip pad

 

145 cm of perfect visibility The SMB must be visible at a long distance. The bright color of the xDEEP buoy is clearly visible even during unfavorable weather conditions and complies with the requirements of the maritime visibility standards.

The SMB is not an advertising banner, therefore we decided to leave the buoy material free from the big logo of the xDEEP to make the bright-coloured surface as large as possible.

Visible also at night and at very long distances The xDEEP SMB is equipped with a special 3M Scotchlite reflective tape with SOLAS maritime visibility certificate.

This perfect fluorescent material guarantees that your buoy will be visible at a very long distance. It is especially important at sea where at night it is very difficult to make out something as small as a surface marker buoy.

Emergency buoyancy device in a few seconds In emergency situations, you may need to have an additional source of buoyancy which will help you or any other diver remain surfaced.

The xDEEP SMB can be converted in a few seconds into an emergency source of buoyancy by clipping its ends together with a double-ended snap hook.

It is an ideal solution since you take the buoy with you every time you dive.

Always ideally cleared and at hand In the lower part, the SMB is equipped with a rubber band loop which the rolled up buoy is ideally cleared and takes up little space.

Such a solution is much better than any buoy holder, since when it is needed, you can unroll it with one move without wasting time.

Space for chemical light or message In the upper part of the SMB, there is a transparent holder where you can put the chemical light or a paper with information for the surface support team.

It is a perfect solution when you want to pass a message that you need something, while staying at the deco stop.

Why did we place it on the side and not at the top of the buoy? Such an arrangement guarantees that the things you put inside will not fall out while the buoy is floating on the water.

Easy to deploy The lower loop in the xDEEP SMB was made in such a way so as to maintain its round shape which makes it easier to move the reel or to clip the double-ended snap hook together.

This apparently small change is a huge convenience and speeds up the deployment of the buoy especially when you do it in poor visibility conditions.

We did not use a fixed snap hook on purpose so that in case of the damage of its spring you do not have to unstitch the buoy to replace it.

Top quality fabric from the USA The xDEEP buoy is made of high quality fabric, Nylon 240 dTEX, made in the USA and destined for application in maritime signalling equipment and life jackets.

In the production we applied a special colouring process making the material more resistant to colour-fading due to salty water.


Anti-bacterial coating Wet environment inside the submersible marker buoys is an ideal place for the development of bacteria, mildew and fungi, which can cause chronic sinus infections and can force you to refrain from diving for many weeks.

In the same way, in all the other xDEEP wings as well as in the shell of the surface market buoys, we applied an antibiotic protection which prevents the development of micro-organisms. View less

In addition, xDeep Closed Dsmb 140 in the Safety category from your online dive store, you can find other products related with Buoys. If you are interested in buying other products from the brand xDeep, at scubastore, you will find a big variety in dive products that can also interest you. xDeep is focused on innovation and improving the dive experience for both beginner and advanced level while maintaining low prices.

xDeep Weight Pockets are perfect for divers looking to remove a weight belt from their rig altogether. xDeep ACB pocket's slide on to the waist strap of your harness an connect to your backplate so they do not move around, the left hand pocket has a d-ring fixed to the outside to replace the existing one on a DIR style harness. xDeep Harness Weight Pockets are available to two sizes, the medium size takes up to 3kg on either side for 6kg total, size XL takes up to 6kg on either side for a total of 12kg. Having two sizes of pockets allows divers to choose how much weight they need based on build, tank size and exposure protection. The xDeep Weight Pockets are fitted with large plastic pinch-clips that keep the inner weight pocket inside the outer sleeve but also makes it very easy to remove the weight in an emergency.

 

Harness webbing (3.3m, 132", 11 foot) from XDEEP.

This webbing is quite thick and extra strong.  As a harness, the thicker webbing makes it easier to put on (not too floppy). The webbing includes an eyelet at the mid point for Zeos and Hydros BCDs.

The straps are made of polyamide – a fabric totally resistant to water, including sea water. Polyamide fabrics are abrasion-resistant materials and consequently the durability of the harness is much higher than those made of less durable materials.

The XDEEP Complete Power Inflator with Corrugated Hose and Elbow is the perfect product to replace or upgrade your existing power inflator module. Complete your order with other related Accessories to help you enjoy your diving even more. Finally if you are thinking about upgrading, why not check out our BCD or Wing Systems?

Furthermore we offer a full range of XDEEP products. A brand which is renowned for high quality material and construction that never fails to deliver.

XS Scuba Basic Scuba Diving Hanger For Adult.

Highlights:

• Wider 1.4 in (3.6 cm) support beams
• Sturdy one-piece construction
• Tough X-beam design
• Dimensions: 16.6 x 10.4 x 1.4 in (42 x 26.5 x 3.5 cm)
• Weight: 5 oz (142 g)

Composition:

• Plastic

Color: Black

Product Code: AC540BK

XS Scuba Quick Attach Single Weight Pocket Tek Accessories Diving Instrument For Adult.

Highlights:

• Quick attachment with double hook-and-loop closure at bottom of pocket
• Same design as Single Weight Pocket (p/n WB101), except:
• Allows pocket to be quickly added without having to slide over the end of webbing
• Designed to add up to 5 lbs (2.25 kg) of bagged shot or hard weight
• Easy addition to XS Scuba weight belts or other harness systems
• Perfect for adjusting your trim

Composition:

• Neoprene

Color: Black/Blue

Product Code: WB101QA-BK

XS Scuba Quick Release Single Weight Pocket Tek Accessories Diving Instrument For Adult.

Highlights:

• Hook-and-loop release weight dump - pull out, then down
• Designed to add up to 5 lbs (2.25 kg) of bagged shot or hard weight
• Attaches by sliding over the end of any 2 in (50 mm) webbing
• Easy addition to XS Scuba weight belts or other harness systems
• Perfect for adjusting your trim

Composition:

• Neoprene

Color: Black/Blue

Product Code: WB101QR

XS Scuba Seaside Pro Mesh Diving Bag For Adult.

Highlights:

• Great for snorkeling adventures and beach outings
• Tough polyester mesh with thick, tarpaulin bottom panel
• Single, padded sling strap with attachment loop
• Dimensions: 12 x 24 in (30 x 60 cm)

Composition:

• Mesh

Color: Black

Product Code: BG340BK

The DIN to Yoke Adapter allows divers to change DIN-fitted tank valves to fit standard yoke-type regulators in seconds. 

Highlights:

• Convert din valve to yoke
• Nitrox Compatible to 40% (The Recreational Limits of Nitrox)
• Will only work with 200 bar din valves

Composition:

• Metal

Color: Silver

Product Code: VP16-V