Buzz Rack

The BEETLE 4×4 is specially made for SUV with off-centered spare tire on the rear hatch. This convenient and easy to install rack allows you to carry up to 2 bikes.

Highlights :

• Max Load: 15 kg
• Carries: 2 Bikes
• FRAME: The geometry of the BEETLE frame allows a quick and easy installation on most spare tyres. Solidly built of steel and high impact resistant plastic materials. No tools required, 100% assembled
• QUICK INSTALLATION. Using the hub mechanism, you can adjust, fold or unfold the rack without need for any extra tool
• BIKE FRAME SUPPORTS. The soft cradles and rubber straps allow an easy attachment of the bikes without damaging the paint. The cradles can be tightened to the rack. The cradles are made a a hard and a soft part to protect the bike frame. They are quick and easy to use. They have been 100% tested in our production line
• SAFETY. The product is supplied with an additional safety strap that allows to secure the bike
• BIKE PROTECTION. A protective pad covering an anti-sway tube will prevent the bike from moving and damaging the spare wheel, protecting the bike at the same time
• TYRE POSITION. Depending on the car model, you can find the spare tyre positioned to the right or left side. The bike support tube can be installed accordingly to fit all these cars
• SIZE. The BEETLE can be folded and will take no space in your car

Color: Black/Yellow

Product Code: BC-2525-2H

Buzz Rack Buffalo 4 Handle and Biking Rack.

Highlights:

• 4 Bikes Max weight: 60 kg
• Max bike weight: 15 kg
• 65 mm Spacce between bumper and tow ball
• Distance between bars: 31.4 cm
• XP R18-904-4 Compliant
• Not for RV and Trailers
• The patented conical tow ball clamp fits onto all 50mm diameter tow balls, even the ones which don’t meet BS standards with e.g. rough casting around the tow ball neck.
• Fitting is a matter of spinning a hand-turning wheel, a really quick, easy and ergonomically satisfactory thing to do. Turn the key in the tightening wheel and the carrier is then locked to the tow ball. Additional tensioning of a Nylock nut is sometimes required (spanner supplied), depending on the tow ball, to make sure the carrier is firm.
• Tilting is safer than with most hang-on racks, because you can take the weight of the bikes as you push down on the foot pedal, and there is double tilt stop a steel loop as well as the reinforced plastic foot pedal. When you lift the bikes back to the vertical, the foot pedal springs back to its closed position, holding the bike weight.
• The support arms are 28cm apart, centre to centre, a distance which will suit the majority of modern frames; we supply a telescopic cross bar for use with non standard frames
• Two top quality 300cm safety straps are also provided (buckles sewn not crimped). One of these should be threaded through all the bike wheels to prevent swaying and friction damage it’s up to you to provide any extra protection required and the other should be passed through all the bike frames and then looped around the carrier.
• The bike holder arms should be moved from the horizontal to the vertical for storage, or when the vehicle is parked up.
• Dimensions: 84.5 cm high from the centre of the ball and 67 cm deep from ball centre.

Composition:

• Metal

Color: Black

Product Code: BC-12575-4EH

Buzz Rack Moose 4 Handle and Biking Rack.

Highlights:

• 4 Bikes Max weight: 60 kg
• Max bike weight: 15 kg
• 65 mm Space between bumper and tow ball
• Distance between bars: 31.4 cm
• XP R18-904-4 Compliant
• Not for RV and Trailers
• The patented conical tow ball clamp fits onto all 50mm diameter tow balls, even the ones which don’t meet BS standards with e.g. rough casting around the tow ball neck.
• Fitting is a matter of spinning a hand-turning wheel, a really quick, easy and ergonomically satisfactory thing to do. Turn the key in the tightening wheel and the carrier is then locked to the tow ball. Additional tensioning of a Nylock nut is sometimes required (spanner supplied), depending on the tow ball, to make sure the carrier is firm.
• Tilting is a safe single-handed operation, even with the bikes fitted. The Moose 4 tilts to allow access to the boot on most cars. If you have a van or an MPV with a vertical tailgate, and you want to be able to access the boot with the bikes loaded, we recommend the Atera STRADA DL3.
• The support arms are 28cm apart, centre to centre, a distance which will suit the majority of modern frames; we supply a telescopic cross bar for use with non standard frames
• Two top quality 200cm safety straps are also provided (buckles sewn not crimped). One of these should be threaded through all the bike wheels to prevent swaying and friction damage – it’s up to you to provide any extra protection required and the other should be passed through all the bike frames and then looped around the carrier.
• The bike holder arms should be moved from the horizontal to the vertical for storage, or when the vehicle is parked up.
• Dimensions: 84.5cm high from the centre of the ball and 52cm deep from ball centre.

Composition:

• Metal

Color: Black

Product Code: BC-12574-4EHF

The BuzzRack Mozzquito is a robust rack that will carry up to three bikes and fits many cars. It has a simple and intuitive design and attaches to the tailgate using six straps with rubber coated hooks. Foam pads on the rack protect your bumper / tailgate.

Highlights :

• Max Load: 45 kg
• Carries: 3 Bikes
• Bike Weight: 15 kg max
• Your bikes are held securely in place in separate cradles
• The arms are positioned 31.8cm apart (measured from the outer edges)
• The rack is adjusted with an easy-to-use dial with settings for your car
• Supplied fully assembled – ready to mount to your car
• Folds for easy storage – compact enough to fit in the boot
• Dimensions (folded): 71 x 47 x 15cm
• The narrow arm design means most bike frames will fit securely onto this rack. This carrier has a distance of 38.1cm between the bike support arms. An ‘frame adapter’ will be required for some ladies and full-suspension bikes (listed below)

Color: Black/Yellow

Product Code: BC-17512-3H

Premium solution to carry 2 bikes on a spare tire. The platform design enhances the stability and minimizes the possible contacts between the 2 bikes. Easy mounting and fits most spare tire sizes.

Highlights :

• Max Load: 30 kg
• Bike Weight: 15 kg
• Best For: Hatchback
• Carries: 2 Bikes
• FRAME: The geometry of the PILOT 4×4 frame allows a quick and easy installation on most cars equipped with spare tires.Solidly built of steel and high impact resistant plastic materials.The geometry keeps the bikes away from the car.
• EASY AND SECURE INSTALLATION: Multiple stud pattern and optional adapters included to fit most spare tire sizes.
• LOCKING CLAMPS: The clamps are big enough to fit most bike frames.Made of reinforced Nylon, the clamps are highly resistant.An integrated pad prevents scratching the bike paint and allow most brakes cables to go through.Each clamp is equipped with a locking knob.
• WHEEL SUPPORTS: The wheel holders will accommodate all wheelbases, even very small children’s bikes.The straps allow a secure attachment of the wheels and the pads protect the rims.The straps are long enough to hold the biggest rims.
• STABILITY: Enhanced stability with rubber stabilizers.
• SIZE: If you don’t carry any bike, you can always fold the platform which might be convenient for parking.

Color: Black/Yellow

Product Code: BC-14532-2STC

Economical option for a repair stand, this product is simple and easy to use and has a great stability. A wall mounted bike work stand that is simple and easy to use and has a great stability.

Highlights :

• Capacity: 25 kg
• Hold the bike securely using the seat post, with an S-shaped head and triangle post
• NOT suitable for bikes with carbon seat posts
• Extends 33cm from the wall
• Folds flat when not in use
• Max load: 25kg

Color: Black

Product Code: AA-16703

Buzz Rack Buffalo H4 Handle and Biking Rack.

Highlights:

• 4 Bikes Max weight: 60 kg
• Bike Weight: 15 kg Max
• XP R18-904-4 Compliant
• For 3.175 cm and 5.08 cm Hitch Receivers
• Distance Between Bars: 34.2 cm
• The frame of the product is protected by a large foam. It also helps to protect the first bicycle.
• The integrated locking cable assures a secure transportation.Just take the cable out of the main frame to secure the bikes.
• The integrated locking cable assures a secure transportation.Just take the cable out of the main frame to secure the bikes.
• With the easily accessible pedal, you can safely tilt down the carrier far enough for gate access even with bikes on.The system is secured by a safety knob.
• The product is supplied with an additional safety strap and a padded foam that allow to secure the bike to the main frame without damaging it.
• The bike holder arms can be folded for storage, or when the vehicle is parked up.
• The maximum permitted load you can carry is also determined by the tow bar nose weight; you will need to check you don’t exceed this before using any tow ball mounted bike carrier.
• Not suitable for trailers, campers, or RVs. These vehicles need special racks that require much stronger specifications due the dynamics involved.

Composition:

• Metal

Color: Black/Grey

Product Code: BC-13823-4AF