Skilled professionals you can rely on.
Sort by:
349 products
349 products
Rubber Knob Thermo XS Scuba - dark green
Highlights
- Solid, durable rubber handwheel / rubber knob with perfect grip and longer design.
- Simply mounted on the valve instead of the existing handwheel.
- Dimensions. 43 mm long:
- 50 mm long
- 39 mm upper outside diameter knife
- 30 mm lower outside diameter knife
- Please note inner diameter: Inside diameter bottom 25,5 mm
- Please check the inside dimension before ordering - does the handwheel fit on my valve?
- Colour: dark green
The Trident Schrader Valve Stem is for BCD inflators as well as many other things such as bicycle inner tubes, Dive Floats inner tubes, car tires and many other applications.
Highlights
- Trident Schrader Valve Stem Features:
- Fits BC Inflator Head
- Fits Inner Tubes for dive floats, etc
- Fits Bike Tires
- Fits Car Tires
- Many other applications
Valve DIN insert 1/4” hex wrench
Highlights
- Port plugs 3/16” hex wrench
- Valve dip tube 5/32” hex wrench
- Valve nut slotted screwdriver
- Phillips screwdriver
- Inflator schrader valve tool
- Bronze O-ring pick
- Orifice adjustment flat screwdriver
- Bottle opener body
- Dimensions: 2.5 x .75 x 1.4 in
- Weight: 4 oz
The perfect companion to our Scuba Multi-Tool.
Highlights
- Remove and replace the most common scuba hoses
- 1/2”, 9/16”, 5/8” & 11/16” wrenches
- Most common hex wrenches 5/32”, 3/16” & 1/4”
- Valve handwheel driver
- All imperial sizes for US products
- Stainless steel construction with silicone over mold
- Compact size: 3.85 x 0.5 in (98 x 13 mm) thick
Get your buddy’s attention underwater
Highlights
- Fits 6.9 to 8.0 in (175 to 203 mm) diameter cylinders
- Install around bottom of cylinder
- Color: neon green
Drain it quietly, drain it slowly, drain it safely
Highlights
- Attach to DIN or Yoke style valves
- Exhaust holes on opposite side of XS Scuba logo
- All brass construction
Xs-Scuba Unisex Cl01 Coil Lanyard 52 Inch W/ Plastic Clip/Split Black Ring Diving Instrument
$20.00
Unit price perXs-Scuba Unisex Cl01 Coil Lanyard 52 Inch W/ Plastic Clip/Split Black Ring Diving Instrument
$20.00
Unit price perCoil Lanyard - 52" Plastic Clip/Split Ring
- One end has a Delrin / stainless steel wire gate snap hook. The other end has a stainless steel split ring and cord with lock
- These coils lanyards are reinforced with internal stainless       steel cable for maximum strength
- Just disengage the side release clip to extend the 10" (25.4 cm)Â coil lanyard a full 52"Â (132 cm)
- Fastens back to a secure, compact position in seconds
- Excellent for small lights and writing slates
Xs-Scuba Unisex Cl02 Coil Lanyard-52 Inch With Snp Clp/Split Black Rng Diving Instrument
$28.00
Unit price perXs-Scuba Unisex Cl02 Coil Lanyard-52 Inch With Snp Clp/Split Black Rng Diving Instrument
$28.00
Unit price perCoil Lanyard - 52" Stainless Steel Snap Clip/Split Ring
One end has a stainless steel carabiner clip. The other end     has a stainless steel split ring and cord with lock
These coils lanyards are reinforced with internal stainless steel cable for maximum strength
Just disengage the side release clip to extend the 10" (25.4 cm)Â coil lanyard a full 52"Â (132 cm)
Fastens back to a secure, compact position in seconds
Ideal for use with gauge consoles and medium-sized lights
Xs-Scuba Unisex Cl03 Coil Lanyard-52 Inch With Clip/2 Ends Black Diving Instrument
$36.00
Unit price perXs-Scuba Unisex Cl03 Coil Lanyard-52 Inch With Clip/2 Ends Black Diving Instrument
$36.00
Unit price perCoil Lanyard - 52" Stainless Steel Clip Both Ends
Both ends have stainless steel carabiner clips
These coils lanyards are reinforced with internal stainless steel cable for maximum strength
Just disengage the side release clip to extend the 10" (25.4 cm)Â coil lanyard a full 52"Â (132 cm)
Fastens back to a secure, compact position in seconds
Perfect for camera equipment and large lights
|
|
Coastal Standard
- A nylon, self-repairing, #10 coil zipper, with two zipper pulls, runs down the center
- 2†triangle rings on either end accommodate the optional XS Scuba shoulder strap (p/n BG915)
- Padded carry handle on top
- Large enough to carry a complete set of scuba gear
Dimensions: 13 x 13 x 29 in. (33 x 33 x 74 cm)
Xs-Scuba Unisex Diving Hl303 Highland Airspool With Black Viton O-Rings Spare Parts
$10.00
Unit price perXs-Scuba Unisex Diving Hl303 Highland Airspool With Black Viton O-Rings Spare Parts
$10.00
Unit price perRequired swivel between HP hose and SPG
Brass construction
Highland Airspool (p/n HL303)
- Highland by XS Scuba Schrader Valve Tool:
- Fixes Leaking Low-Pressure Inflator Quick-Disconnect Hose Fittings
- Same Type Valve as Car or Bicycle Tires
- Valve Tool Easily-Removes-and-Installs Schrader Valves
- Works with Most-Manufactures Standard Low-Pressure Inflator Quick-Disconnect Hoses
- Handy Tool for Any-Divers Save-a-Dive Kit
- Steel Tool Shaft and Durable Plastic Handle
- Great Addition to Professional Scuba Repair Technicians Tool Arsenal
Xs-Scuba Unisex Hl601Bk Highland Regulator Necklace-Stndrd 7.5 Inch Dia Black Diving Instrument
$18.00
Unit price perXs-Scuba Unisex Hl601Bk Highland Regulator Necklace-Stndrd 7.5 Inch Dia Black Diving Instrument
$18.00
Unit price perAttaches easily to any regulator second stage mouthpiece
Allows regulator to hang close under the chin
Keep your second stage where you need it
Durable, “no memory†silicone
-
Available in two sizes: 7.5†and 10†diameters
Standard 7.5" (p/n HL601BK)
Xs-Scuba Unisex Hl708 Highland Technical Spring Straps 8 Inch Black Diving Instrument
$55.00
Unit price perXs-Scuba Unisex Hl708 Highland Technical Spring Straps 8 Inch Black Diving Instrument
$55.00
Unit price perHighland Technical Spring Straps
Spring heel fin straps are popular because they are comfortable, easy to use and practically indestructible. Highland premium spring fin straps are made from stainless steel springs and covered with nylon tube webbing to protect the spring and keep out grass and other plant matter. The thumb puller is streamlined and designed not to snag on objects like traditional finger loop designs can do. The springs have machined Delrin ends that attach to one of two types of stainless steel adapter fittings with a stainless screw and nylon lock nut. Nylon line on the inside of the spring prevents over-extension of the strap.
One kit attaches to most brands of scuba fins
High quality stainless spring & buckles will not rust
Streamlined thumb pull will not snag
Internal cave line to prevent over stretching of springs
Includes “old school†buckles for rubber fins & large post buckles for most modern fins
-
Available in three sizes
p/n HL708
Spring Length 8" / 203mm
Overall Length 10.5" / 267mm
Xs-Scuba Unisex Hl710 Highland Technical Spring Straps 10 Inch Black Diving Instrument
$55.00
Unit price perXs-Scuba Unisex Hl710 Highland Technical Spring Straps 10 Inch Black Diving Instrument
$55.00
Unit price perHighland Technical Spring Straps
Spring heel fin straps are popular because they are comfortable, easy to use and practically indestructible. Highland premium spring fin straps are made from stainless steel springs and covered with nylon tube webbing to protect the spring and keep out grass and other plant matter. The thumb puller is streamlined and designed not to snag on objects like traditional finger loop designs can do. The springs have machined Delrin ends that attach to one of two types of stainless steel adapter fittings with a stainless screw and nylon lock nut. Nylon line on the inside of the spring prevents over-extension of the strap.
One kit attaches to most brands of scuba fins
High quality stainless spring & buckles will not rust
Streamlined thumb pull will not snag
Internal cave line to prevent over stretching of springs
Includes “old school†buckles for rubber fins & large post buckles for most modern fins
-
Available in three sizes
p/n HL710
Spring Length 10" / 254mm
Overall Length 12.5" / 318mm
Xs-Scuba Unisex Hl712 Highland Technical Spring Straps 12 Inch Black Diving Instrument
$55.00
Unit price perXs-Scuba Unisex Hl712 Highland Technical Spring Straps 12 Inch Black Diving Instrument
$55.00
Unit price perHighland Technical Spring Straps
Spring heel fin straps are popular because they are comfortable, easy to use and practically indestructible. Highland premium spring fin straps are made from stainless steel springs and covered with nylon tube webbing to protect the spring and keep out grass and other plant matter. The thumb puller is streamlined and designed not to snag on objects like traditional finger loop designs can do. The springs have machined Delrin ends that attach to one of two types of stainless steel adapter fittings with a stainless screw and nylon lock nut. Nylon line on the inside of the spring prevents over-extension of the strap.
One kit attaches to most brands of scuba fins
High quality stainless spring & buckles will not rust
Streamlined thumb pull will not snag
Internal cave line to prevent over stretching of springs
Includes “old school†buckles for rubber fins & large post buckles for most modern fins
-
Available in three sizes
p/n HL712
Spring Length 12" / 305mm
Overall Length 14.5" / 368mm
Xs-Scuba Unisex Rattle Stick W/Attachment Clip And Magnet Cap Black Diving Instrument
$38.00
Unit price perXs-Scuba Unisex Rattle Stick W/Attachment Clip And Magnet Cap Black Diving Instrument
$38.00
Unit price perRattle Stick With Clip
- Give it a shake to get your buddies attention
- Nice and loud underwater sound
- Built-in attachment clip
- Cap with magnet to prevent unwanted sound
- Dimensions: 5.5†x 1† (14 x 2.5 cm)
Xs-Scuba Unisex Sb725 Highland 7.25 Inch Cylinder Bands 2.5 Inch Wide Silver Diving Instrument
$167.00
Unit price perXs-Scuba Unisex Sb725 Highland 7.25 Inch Cylinder Bands 2.5 Inch Wide Silver Diving Instrument
$167.00
Unit price perXS Scuba Dual Cylinder Bands for scuba tanks are made out of stainless steel mounting hardware.
- 2-1/2 in. wide, 100% 316 stainless steel
- 16 gauge with #4 finish
- 11 gauge backup plates
- Stainless steel mounting hardware
- 7-1/4 in. diameter cylinders
- 4-1/2 in. bolt length
Single Weight Pocket With Velcro Front
Same design as Single Weight Pocket above, except:
- Allows excess webbing from tank cam strap to attach to Velcro® loop on front of weight pocket
- Keeps cam strap webbing secure against cylinderDesigned to add up to 5 lbs. of bagged shot or hard weight
Easy addition to XS Scuba weight belt or other harness systems
Perfect for adjusting your trim
Color: black
Scubapro Mk25 Evo/A700 Carbon Bt Dive Regulator System Diving Equipment Black
$1,769.00
Unit price perScubapro Mk25 Evo/A700 Carbon Bt Dive Regulator System Diving Equipment Black
$1,769.00
Unit price perThe premium MK25 EVO/CARBON BLACK TECH is not only the best-breathing reg in SCUBAPRO's line, it's also the leader in advanced design and materials. The A700 CARBON's main casing is full metal to take advantage of the extremely high heat exchange rate that makes it such a great choice for cold-water diving, and its front cover is handmade out of lightweight and durable carbon fiber. The A700 CARBON is teamed with the MK25 EVO, widely considered the gold standard in first stage performance, and finishing off this premium air delivery system is a DLC (Diamond-Like Carbon) Black Tech coating. Put it all together and you have diving's ultimate muscle reg that looks great, is ultra-durable, and delivers the best breathing performance around.
Highlights:
- Handmade carbon fiber front cover, metal casing and metal valve housing (barrel) make for a rugged second stage able to withstand years of aggressive diving.
- Carbon fiber is extremely lightweight and, unlike metal that can change shape when dropped or struck against a hard object, carbon fiber can resist substantial shocks without damage.
- Metal case construction enables the use of a larger diaphragm inside a compact casing, increasing breathing sensitivity.
- DLC Black Tech coating protects from corrosion and scratches and lends a technical look to the regulator.
- Air balanced second stage smooths out the inhalation effort when diving at varying depths and supply pressures.
- User controls include a diver-adjustable inhalation effort knob and coaxial Venturi-Initiated Vacuum Assist (VIVA) switch.
- Air balanced piston first stage in a Black Tech-coated brass body delivers consistent and effortless airflow, regardless of depth, tank pressure, or breathing rate.
- With its patented ultra-freeze-resistant Extended Thermal Insulating System (XTIS) the MK25 EVO offers excellent thermal insulation by fully isolating the mechanical elements of the first stage from the cold, all without compromising breathing performance.
- Anti-freeze protection radically increases breathing reliability when diving in the most extreme water temperatures.
- Two opposing high pressure ports allow the first stage to be positioned either up or down.
- Four high-flow and one axial super high-flow low pressure ports on a swivel turret maximize hose routing options.
- External intermediate pressure adjustment enables technicians to fine-tune performance quickly and easily.
Composition:
- Body: Chrome-plated marine-grade brass with a Diamond-Like Carbon (DLC) Black Tech coating for enhanced scratch and corrosion resistance.
- Thermal Insulation: Features the Xtreme Thermal Insulating System (XTIS), including an insulating bushing, antifreeze cap, and insulated spring, improving cold-water performance by 30% over previous models.
Color: Black
Product Code: 12.770.800
Scuba Pro Mk25 Evo Regulator Bt D300/G260 Unisex Diving Instrument Black
$1,620.00
Unit price perScuba Pro Mk25 Evo Regulator Bt D300/G260 Unisex Diving Instrument Black
$1,620.00
Unit price perScuba Pro MK25 Regulator EVO/G260 Diving Instrument For Divers.
Highlights :
- Air balanced second stage valve smoothes out the inhalation effort at varying depths and supply pressures
- A diver-adjustable inhalation effort knob fine-tunes air delivery to suit changing depths, water conditions and personal tastes, and a Venturi-Initiated Vacuum Assist (VIVA) dive/pre-dive switch prevents free flows in cold water or when used as an octopus.
- High-flow exhaust valve reduces exhalation for better overall breathing comfort, and the reversible hose attachment allows you to easily adjust hose routing for tech diving configurations
- Super-flow hose features an oversized bore that allows more air to flow on each inhalation.
- Air balanced flow-through piston provides constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
- Patented XTIS (Extended Thermal Insulating system) insulates the inner mechanism from the environment, improving cold-water resistance and delaying ice formation in extreme cold-water conditions without compromising breathing performance.
- Two opposing high pressure ports allow the first stage to be positioned either up or down.
- Four high-flow and one axial super high-flow low pressure ports on a swivel turret maximise hose routing options.
- Includes a zippered fabric case complete with specially fitted padding to protect the regulator during storage and transport
Composition:
- Carbon Fiber
- Metal Parts
Color : Black
Product Code : 12.771.650
The stellar SPECTRA dual lens offers a wide view and a convenient water-blocking seal, plus a low-volume design for easy cleaning. Designed to fit a variety of face shapes, the SPECTRA uses a smart, double-sealed silicone skirt for optimal comfort. In addition to comfort, the SPECTRA strap and buckle system is easy to use. Button buckles that attach to the skirt are easy to adjust, optimize strap angle and range of motion for that perfect fit, and allow the mask to fold for easy packing. The skirts with masks are available in both clear and black, and a unique painting process plus a selection of colors makes the SPECTRA a stylish goggle and a comfortable and reliable dive mask.
The compact dual lens design is low in volume for easy cleaning and offers the maximum field of view.
The lenses are made of tempered glass for safety and long-term durability.
The universal skirt design is super comfortable and fits a variety of face shapes.
Button buckles that attach to the skirt easily adjust for a perfect fit.
EZ Equalize nose pocket makes equalization work easy.
The mirrored lens option offers a glare-free view of the underwater world.
The bold colors of the frame include elegant duotones.
Note: The painted finish can be damaged if cleaned with abrasive products.Code : 24.847.130
SCUBAPRO’s 2022 Seawing Supernova represents the next generation of powerful SCUBAPRO fins. Winner of the prestigious, internationally-recognized Red Dot Award for product design, the new Seawing Supernova is a step up from the Seawing Nova in performance, construction, fit and versatility. The flexible Auto-Adjust central panel fine-tunes the angle of attack according to the strength of kick by counter-pivoting, providing a milder angle of attack for comfort when kicking gently, a more aggressive angle of attack when kicking at full strength, and anything in between. When it comes to frog and alternate kicks, the new twin-tip winglets increase control and markedly improve maneuverability. The Seawing Supernova’s innovative two-piece design, with blade and foot pocket molded separately, makes transport easy, and with the optional full foot pocket the fin can be modified to handle any warm-water dive scenario. The Supernova is the go-to fin for avid recreational and professional divers seeking maximum speed, power and kicking control in all diving conditions.
Highlights :
- Blade’s central panel membrane auto-adjusts the angle of attack based on kicking strength, providing easier kicking when cruising and maximum power when needed.
- Innovative blade shape produces more power, more speed and better maneuverability.
- Central panel Hydra-loop channels water flow rearwards for increased efficiency and thrust.
- Pivot Control Technology ensures that the most efficient 40º to 50º range of angle of attack is maintained.
- Twin-tip winglets improve control and maneuverability for excellent frog and alternate kicks.
- Blade and foot pocket are molded separately with a durable Socket-Lock Connecting System that allows for easy assembly and disassembly.
Composition: Monprene
Color : Black
Product Code : 25.505
Protect your valuable second stage from bumps and scratches witha handy neoprene cover. It attaches to the LP hose and wraps around the second stage casing. Easy to slip on and off, it’s embossed with the SCUBAPRO logo and looks great while protecting your investment.
Showing 300/349
