X-Deep

Highlight :

• Easy and quick adjust mask strap
• Clear

Composition :

• Silicon

Color : Black

Product Code : AC-020

The xDeep Buttplate is designed for sidemount divers who require a secure and reliable attachment point for their cylinders.

Highlights:

• Two Reinforced Eyelets: Simple and secure attachment to a sidemount harness or backplate

Composition:

• Technopolymer Core: Provides exceptional stiffness to prevent movement and bending
• Cordura Outer Layer: Ensures high abrasion resistance for long-lasting durability
• Dual Stainless Steel Rails: Easy to locate and attach sidemount cylinders securely

Color: Black/Silver

Product Code: HA-017-0

The backmount trim pocket XDEEP allows you to weight the tank during the dive like a mask or a parachute.

Highlights:

• Firm fit due to wide fastening
• Is threaded on the Harness webbing
• 2 trim leads in a set, Velcro fastener
• Size: M appeox 1.5 kg per bag
• Otside Dimensions of the bag approx. 120 x 130 x 25 mm

Composition:

• Polymer

Color: Black

Product Code: HA-021-0

The xDeep Ha-010-0 Bent D-Ring (6 mm Thick) is a heavy-duty hardware component used primarily on the shoulder straps of scuba diving harnesses to facilitate easier clipping of stage tanks, backup lights, or other accessories.

Highlights:

• Design: Features a 45-degree bend that causes the ring to stand away from the diver's chest, making it significantly easier to find and clip bolt snaps, even when wearing thick gloves or in low visibility.
• Welded Construction: The ends of the wire are welded together and smoothly polished to ensure maximum strength and prevent the ring from deforming under heavy loads, such as jumping with stage cylinders.
• Fit: Designed to fit all standard 50 mm (2-inch) wide nylon webbing used in technical, sidemount, and backplate-and-wing harnesses.

Composition:

• High-grade 316 marine-grade stainless steel.

Color: Black

Product Code: HA-010-0

• Over-pressure valve
• Metal oral/power inflator valve
• Reflective bands to raise visibility
• pocket for blinking light.

The XDEEP standard cargo bag offers you a large main compartment with internal D-ring and a front compartment with window.

Highlights:

• Size about 24 cm x 18 cm
• It is attached by two double ends to the two attached D-rings

Composition:

• Cordura

Color: Black

Product Code: HA-022-1

xDeep Hydros 40lb Wing System, Inc S/Steel Backplate & TECxs Harness, The classic twinset wing has been completely redesigned. Whilst the elements will be familiar, the attention to detail has left no stone unturned in transforming good into great.

Highlight :

• CORDURA 1100 dTEX
• Anti-bacterial coating
• TPU 0.215mm coating
• Type inflator
• Ultrasonic welding
• HF welding
• Fabric laser cutting
• Amann Serabond thread
• Triple, fully trimmed seams
• CNC edge bevelling

Composition :

• Steel Plate

Color : Black

Product Code : DT-H50-S2

Highlight :

• Large, smooth, anti-tangle trigger.
•  Finger support.
• One size does not fit all
• Scuba Gear
• Bolt Snap
• Surface Makers

Composition :

• AISI 316 stainless steel.

Color : Silver

Product Code : AC-016 

Highlight :

• Solid design, perfect for many applications.

Composition :

• stainless steel

Color : Silver

Product Code : AC-012-0

Highlight :

• large and smooth anti-tangle trigger
• off-center swivel for more space
• finger support
• evenly round hook for easy clipping
• lightweight yet strong construction
• Suitable for stage cylinders and / or sidemount

Composition :

• made of AISI 316 stainless steel

Color : Silver

Product Code : AC-013

XDeep Frameless Diving Mask offers small internal volume and an exceptionally large field of view underwater. This mask has no plastic frame (Frameless), which gives it a slimmer design and minimizes internal space.

Highlights:

• The belt clips are easy to use and very reliable.
• The mask has high glass transparency and offers a wide field of view.

Composition:

• Silicone

Color: Blue

Product Code: Ac-020-8

XDeep Frameless Diving Mask offers small internal volume and an exceptionally large field of view underwater. This mask has no plastic frame (Frameless), which gives it a slimmer design and minimizes internal space.

Highlights:

• The belt clips are easy to use and very reliable.
• The mask has high glass transparency and offers a wide field of view.

Composition:

• Silicone

Color: Lime

Product Code: Ac-020-4

XDeep Frameless Diving Mask offers small internal volume and an exceptionally large field of view underwater. This mask has no plastic frame (Frameless), which gives it a slimmer design and minimizes internal space.

Highlights:

• The belt clips are easy to use and very reliable.
• The mask has high glass transparency and offers a wide field of view.

Composition:

• Silicone

Color: Red

Product Code: Ac-020-6

XDeep Frameless Diving Mask offers small internal volume and an exceptionally large field of view underwater. This mask has no plastic frame (Frameless), which gives it a slimmer design and minimizes internal space.

Highlights:

• The belt clips are easy to use and very reliable.
• The mask has high glass transparency and offers a wide field of view.

Composition:

• Silicone

Color: Transparent

Product Code: Ac-020-2

XDeep Frameless Diving Mask offers small internal volume and an exceptionally large field of view underwater. This mask has no plastic frame (Frameless), which gives it a slimmer design and minimizes internal space.

Highlights:

• The belt clips are easy to use and very reliable.
• The mask has high glass transparency and offers a wide field of view.

Composition:

• Silicone

Color: White

Product Code: Ac-020-5

The xDeep Ha-022-2 Standard (Non-Expandable) Cargo Pouch is a streamlined utility pocket designed primarily for sidemount divers who need to store essential accessories without adding bulk to their profile.

Highlights:

• Dimensions: 250 mm x 170 mm x 15 mm
• Compact Storage: Specifically designed to be a "minimalist" option compared to the larger TEC (expandable) version.
• Two Compartments: Features a large main section for bulkier items and a smaller front compartment with a transparent window, allowing you or your buddy to see if a backup light has accidentally turned on.

Composition:

• 100% Nylon
• Hardware: 316 stainless steel double-ender and internal D-rings.

Color: Black

Product Code: HA-022-2

The Back D-rings for the Stealth 2.0 are the square D-rings that extend off the waist band, which are used for the lower tank conection point (unless using a butt plate). Additional Back D-rings can be useful for additional stage tanks or accessories, on the Stealth or any other technical diving harness.

Highlights:

• The Back D-Rings have four slots for threading onto 50mm / 2in webbing. A central hole can be used for a dome nut with a square shaft key (similar to the crotch strap connection on the Stealth Tec / Rec wing).

Composition:

• Heavy-duty 316 stainless steel.

Color: Black

Product Code: HA-052-0

The xDeep Ha-053-0 Stealth 2.0 Rubber Slidable D-Ring Kit is an essential upgrade for sidemount divers, designed to allow on-the-fly adjustments of cylinder positioning to maintain perfect trim.This kit provides a simple yet effective solution for managing the changing buoyancy of sidemount cylinders (such as aluminum 80s) during a dive. By sliding the rubber D-ring up or down the waist strap, a diver can reposition the tank’s clip-off point to keep cylinders horizontal and streamlined.

Highlights:

• Its a simple yet durable part that will let sidemount diver keep the cylinders in perfect position throughout entire dive ensuring most streamline and comfort trim profile.

Composition:

• Durable Composite Rubber
• 2 inch wide Nylon Harness Webbing

Color: Silver

Product Code: Ha-053-0

The xDeep Ha-011-0 Tri Glider Regular is a high-quality weight retainer and strap adjustment accessory designed for standard diving harnesses.

Highlights:

• Safety: Prevents weights from shifting on the waist belt, ensuring a stable center of gravity during critical dive phases such as ascents or decompression.
• Low Profile: Designed to sit flush against the webbing to minimize snagging points, which is crucial for cave or wreck diving.
• Installation: Can be used on both shoulder straps and waist belts for optimal weight distribution.

Composition:

• Corrosion-reesistant 316 stainless steel

Color: Grey

Product Code: HA-011-0

XDEEP trim pockets can be mounted both to the shoulder straps and to the waist strap. Trimming in sidemount never was so easy. 

Highlights:

•  The XDEEP trim pockets can be used with any sidemount or harness made of 50 mm (2 inch) webbing

Composition:

• Polymer

Color: Black

Product Code: HA-016-0

 

145 cm of perfect visibility The SMB must be visible at a long distance. The bright color of the xDEEP buoy is clearly visible even during unfavorable weather conditions and complies with the requirements of the maritime visibility standards.

The SMB is not an advertising banner, therefore we decided to leave the buoy material free from the big logo of the xDEEP to make the bright-coloured surface as large as possible.

Visible also at night and at very long distances The xDEEP SMB is equipped with a special 3M Scotchlite reflective tape with SOLAS maritime visibility certificate.

This perfect fluorescent material guarantees that your buoy will be visible at a very long distance. It is especially important at sea where at night it is very difficult to make out something as small as a surface marker buoy.

Emergency buoyancy device in a few seconds In emergency situations, you may need to have an additional source of buoyancy which will help you or any other diver remain surfaced.

The xDEEP SMB can be converted in a few seconds into an emergency source of buoyancy by clipping its ends together with a double-ended snap hook.

It is an ideal solution since you take the buoy with you every time you dive.

Always ideally cleared and at hand In the lower part, the SMB is equipped with a rubber band loop which the rolled up buoy is ideally cleared and takes up little space.

Such a solution is much better than any buoy holder, since when it is needed, you can unroll it with one move without wasting time.

Space for chemical light or message In the upper part of the SMB, there is a transparent holder where you can put the chemical light or a paper with information for the surface support team.

It is a perfect solution when you want to pass a message that you need something, while staying at the deco stop.

Why did we place it on the side and not at the top of the buoy? Such an arrangement guarantees that the things you put inside will not fall out while the buoy is floating on the water.

Easy to deploy The lower loop in the xDEEP SMB was made in such a way so as to maintain its round shape which makes it easier to move the reel or to clip the double-ended snap hook together.

This apparently small change is a huge convenience and speeds up the deployment of the buoy especially when you do it in poor visibility conditions.

We did not use a fixed snap hook on purpose so that in case of the damage of its spring you do not have to unstitch the buoy to replace it.

Top quality fabric from the USA The xDEEP buoy is made of high quality fabric, Nylon 240 dTEX, made in the USA and destined for application in maritime signalling equipment and life jackets.

In the production we applied a special colouring process making the material more resistant to colour-fading due to salty water.


Anti-bacterial coating Wet environment inside the submersible marker buoys is an ideal place for the development of bacteria, mildew and fungi, which can cause chronic sinus infections and can force you to refrain from diving for many weeks.

In the same way, in all the other xDEEP wings as well as in the shell of the surface market buoys, we applied an antibiotic protection which prevents the development of micro-organisms. View less

In addition, xDeep Closed Dsmb 140 in the Safety category from your online dive store, you can find other products related with Buoys. If you are interested in buying other products from the brand xDeep, at scubastore, you will find a big variety in dive products that can also interest you. xDeep is focused on innovation and improving the dive experience for both beginner and advanced level while maintaining low prices.

 

STEALTH 2.0 Classic BCD

Packing 16Kg of lift into a streamlined and tough double-shell wing required true innovation. Selecting materials that would stand up to the rigours of cave diving meant no compromises. Combining these demands into a sidemount system that was streamlined, infinitely adjustable and made our competitors systems irrelevant was a challenge XDEEP relished.

Streamlined to your anatomy

One of sidemount divings’ many advantages is the streamlined shape you have in the water. Anything that protrudes or dangles is a potential entanglement hazard, and a serious safety issue.

The STEALTH 2.0 design achieves a streamlined system that stays in tune with your anatomy. Whatever position you are in and regardless of how much gas you have in the wing, the distance of the centre of the wing away from the body is minimal.
 

Perfectly position the wing

Because the wing has its own independent five-point mounting system, you can place the wing exactly where it needs to be.

During the dive as you mount and demount cylinders, drop stages or clip off scooters the wing can be adjusted to maintain trim. For a real squeeze of a restriction, you can even remove it to completely minimise your profile.
 

Always in control, anywhere and everywhere

Diving in caves and wrecks can put your body in some strange and contorted positions, especially in narrow passageways and restrictions. Safety and performance demand you can reach the dump valve with either hand, and dump gas without having to change position.

The STEALTH 2.0 dump valve is located centrally to ensure it can be reached anywhere with either hand. In addition it is placed to offer maximum protection from accidental operation or from being caught or damaged in the environment.
 

STEALTH 2.0 HARNESS A Superb Foundation

The expression ‘thinking outside the box’ is often over used, but to revolutionise the sidemount system harness, that’s exactly what we had to do. Analysing the many systems already on the market was a start. We soon realised that something new and groundbreaking, something that would perform brilliantly in the Yucutan Caves as well as open water, was needed.

The STEALTH 2.0 includes some revolutionary features. Using harness webbing of differing thickness and stiffness meant a better more comfortable fit. Building true anatomical structures into the harness enhanced the diving experience. Movable D rings on the waist strap to allow for changes in tank buoyancy and control of tank position were first seen on the STEALTH 2.0 and have been widely copied since.

 
Ultimate freedom of movement

Whilst we all have different body shapes, our axis of rotation and our centre of gravity are consistent relative to set anatomical landmarks. The STEALTH 2.0 has two ‘nodes’ which act as junctions for the shoulder and waist straps and for positioning the central weight pocket. The harness adjustment allows these nodes to be placed on the axis of rotation so that regardless of your position in the water, the harness will stay exactly as you set it up. The central weight pocket can move relative to the lower node for maximum comfort and zero resistance.

There is no movement of the shoulder straps, no resistance when turning the body and nothing to impede your freedom of movement.
 

Quick to fit and adjust

Single piece harnesses can take up to half a day to fit properly and often need refining post dive. Because the STEALTH 2.0 has independent adjustment of the shoulder and waist straps it is quicker and easier to obtain a custom fit. Adjusting the shoulders does not affect the waist D ring positions, the crotch strap is a simple triglide adjustment.

Instructors and students can save time on their sidemount courses and actually go diving instead of constantly adjusting equipment.
 

Harness webbing fit for purpose

There are three different webbing types of the STEALTH 2.0 applied to best fufill the function required.

On the waist there is a stiff and rigid webbing that enhances the ease of use and operation of the D rings for cylinder mounting. Shoulder straps are softer to improve comfort, fit and flexibility. The crotch strap is very flexible, even soft, to reduce chaffing and wear on your exposure suit.

A simple idea, elegant in application. The world's best weight system

Imitation is the sincerest form of flattery which probably explains why the STEALTH 2.0 weight system is so often copied. Your weights can be configured exactly where you want them to ensure perfect balance and trim, regardless of whether you need one block or ten.

Incredibly flexible, capacity to cope with 1Kg to over 20Kg and designed to keep weights secure and immovable, it truly is a world class system.
 

Take only the weight you need

Cold water diving in a drysuit with a thick undersuit requires a large amount of weight that many sidemount systems struggle to accommodate. This limits where you can place the weight and can upset balance and trim.

The design of the STEALTH 2.0 can manage the perfect placement of a 1Kg block up to over 20Kg of lead with ease. If you are in arctic water or in board shorts and a T shirt, the weight system is flexible enough to meet your needs exactly.
 

Perfect Trim and Balance

The flexibility designed into the STEALTH 2.0 weight system ensures you control weight placement relative to your centre of gravity. The central weight pocket has a considerable range of movement, so it can be ideally positioned for balance. The same principle that is used in twinset diving when moving a V weight into the optimum position.

Perfect trim and balance in any configuration. Smart weight pocket security

In technical and cave diving the consequences of losing weights far outweighs the possible need to drop them. The unique and innovative design of the STEALTH 2.0 weight pocket prevents any accidental loss of weights.

Side fastening bands are overlaid by a main band that prevents unwanted opening of the pocket, even if in contact with the ceiling of a wreck or cave. It is quick and easy to see if the pocket is improperly secured and corrections can simply be made, even underwater.

Highlight :

• Wing NX Zen double layer 17 liters capacity
• SS Backplate
• Inflator hose
• Single tank adapter
• 2 single tank straps

Composition :

• Harness NX Series with 3D mesh backplate pad and shoulder pads
• stainless

Color : Black

Product Code : ST-ZEN-S10

Experience diving freedom with the XDEEP Zeos 28. Meticulously engineered in Europe, this wing BCD is obsessed with quality and performance. Its innovative design and stainless steel backplate ensure perfect trim and unparalleled stability, eliminating the "sea horse" position of traditional jackets. The unique 3D Mesh padding provides exceptional comfort without adding buoyancy. With 28 lbs of lift, this rugged and reliable system offers a streamlined profile underwater and holds you high above the waves on the surface. Take your diving to the next level

Highlights:

• Harness type: Classic backplate with the harness made of single piece of webbing
• Harness sizes available: One universal size with large adjustment range
• Harness adjustment: Adjusted with the tri-gliders
• Quick unfastening of the shoulder straps: Optional
• Weight pockets: Modular weight system with the capacity from 0 kg to 16 kg (35 lbs)
• Backplate pad: Optional
• Shoulder straps pads: Optional
• Single tank adapter: Classic single tank adapter
• Crotch strap: Classic straight crotch strap
• Full set weight(without weight pockets): 3.4kg
• For steel backplate add 2 kg or 4.4 lbs. 7.5lbs
• Cylinder type: Single tank
• Maximum size: 15 L
• Diameter: od 140 mm/do 240 mm
• Water temperature: Between -2°C and 40°C
• Air temperature: Between -20°C and 60°C

Composition:

• Stainless Steel Backplate
• Double Shell
• Outer shell fabric: Cordura 1100 dTEX
• Inner bladder fabric: Nylon 440 dTEX

Color: Black

Product Code: St-Z28-S4